Dell is undoubtedly one of the most promising brands in today’s generation. However, technical glitches are something unavoidable in any modern technical gadgets that you can glance on. One of the notable issues which the Dell users face is the error message “Dell AC adapter type cannot be determined” which happens to be really frustrating for all of the users who reported it. If this is the situation, you are stuck with, then hopefully after a thorough study of this article you can get rid of it. Here from this article, you will get the complete guidelines regarding the issue along with the complete solving methods.
Causes which are Responsible for Dell Laptop AC Power Adapter Type Cannot Be Determined
There are different reasons which are determined by the experts for this error and are as listed below:
- Damaged AC adapter: If you are trying to use an AC adapter which gets damaged, then this will popping up this AC power adapter type cannot be determined error message window. If this is the case that you are using a damaged AC adapter. To check, try this adapter in a different device. And if you find that this works properly, then it identifies that the cause for which this error is occurring is different but not the adapter issue.
- Improper installation conditions: Another probable cause for which you are getting the error message window, is the wire loosening effect. And in most cases, it was found that the proper cause for this error is the improper installation of AC power adapter in Dell laptop. It is always recommended that you need to use a genuine adapter, to increase the lifespan of your device by charging the device in a measuring amount of power from the wall socket source.
Whatever be the cause, but to get rid of it you need to apply the proper solving methods according to the cause(s) of the issue. So, let us check the methods:
Methods to Fix Dell AC Power Adapter Type Cannot Be Determined Issue
The methods to solve this error is quite simple and also you need to spend less effort on doing these below-said steps. So, without wasting time, you can check out these methods:
Method 1: Run a Power Cycle of the Dell PC
This is the basic method which you need to follow. It is not only easy to proceed with but at the same time also very effective in solving this glitch. The steps to follow for performing this method are as follows:
First of all, shut down your laptop. Next, switch off the Power Supply, if it is connected with the source. After that, detach the charger from the rear portion of the laptop. And if the laptop is designed in such a manner that you can able to open the battery from it. In this case, do this as well. Next, press and hold the power button for about 30 seconds, this is to ensure that no power remaining in the laptop. After that, connect the battery properly at first, if you have removed it.
Next, reconnect the AC power adapter to the rare of the laptop. And turn on the power supply. Further, press the Power button, this is to turn on your laptop. And then, check in the battery section of the laptop, which is generally located near to the below corner of the Taskbar. This is to verify if the charging process is displayed. And if it is likewise, then this will ensure that the Dell laptop AC power adapter type determination problems get fixed.
Method 2: Try with a Different AC Adapter
After running a power cycle, if, still you are getting the adapter type cannot be determined error message then try a different AC adapter instead. Many of the times, it is found that the main culprit for which this error message generates, is due to the damaged AC adapter. If this is the case, to check you can also try this adapter in a different Dell laptop. And after attaching the AC adapter to a different device you find no error generates, then this signifies that the AC adapter is OK and the error message is wrong. If this is the case, then you can disable the error message by following the steps as below.
Steps to Disable Adapter Warnings in BIOS
The steps to follow for disabling the adapter warning in BIOS is very simple and are as below. But, it is recommended that proceed with this method if you already have a knowledge regarding BIOS.
First of all, restart your Dell laptop. After that, as the screen glows and the start window appears, keep pressing the F2 key. This will navigate you to the Booting window. From here, go to the Advanced tab. Next, under the Advanced tab using the keyboard navigation key reach to the Adapter Warnings section. Beside this Adapters Warnings section, you will see the status of this setting, that is Enabled. And to make this setting disabled, click on Adapter Warnings and choose on Disabled from the options. After making this setting click on Save and Exit from the window.
Note: Always it is recommended to use the genuine Dell AC power adapter to avoid such irritating issues. In most of the times, the Dell AC power adapter type cannot be determined error visitors are those who uses non-genuine assembling parts.
All these above are the result oriented methods for solving the Dell AC power adapter type cannot be determined issue. Hopefully, you will get no issue while trying these aforesaid methods of solving this glitch.